protel dxp2004进行drc后出现的错误,有没有人可以帮我看看是什么原因呢?Processing Rule :Short-Circuit Constraint (Allowed=No) (All),(All)Violation between Pad S14-M(152.0613mm,109.982mm) Multi-Layer andArea Fill (149.5213mm,106.17

protel dxp2004进行drc后出现的错误,有没有人可以帮我看看是什么原因呢?Processing Rule :Short-Circuit Constraint (Allowed=No) (All),(All)Violation between Pad S14-M(152.0613mm,109.982mm) Multi-Layer andArea Fill (149.5213mm,106.17
protel dxp2004进行drc后出现的错误,有没有人可以帮我看看是什么原因呢?
Processing Rule :Short-Circuit Constraint (Allowed=No) (All),(All)
Violation between Pad S14-M(152.0613mm,109.982mm) Multi-Layer and
Area Fill (149.5213mm,106.172mm) (154.6013mm,113.411mm) Top Layer
Violation between Pad S5-M(72.8133mm,109.982mm) Multi-Layer and
Area Fill (70.2734mm,106.1721mm) (75.3534mm,113.411mm) Top Layer
Violation between Pad S7-M(90.424mm,109.982mm) Multi-Layer and
Area Fill (87.884mm,106.1721mm) (92.964mm,113.411mm) Top Layer
Violation between Pad S6-M(81.6187mm,109.982mm) Multi-Layer and
Area Fill (79.0787mm,106.1721mm) (84.1587mm,113.411mm) Top Layer
Violation between Pad S13-M(143.256mm,109.982mm) Multi-Layer and
Area Fill (140.716mm,106.172mm) (145.796mm,113.411mm) Top Layer
Violation between Pad S9-M(108.0346mm,109.982mm) Multi-Layer and
Area Fill (105.4947mm,106.1721mm) (110.5747mm,113.411mm) Top Layer
Violation between Pad S4-M(64.008mm,109.982mm) Multi-Layer and
Area Fill (61.468mm,106.1721mm) (66.548mm,113.411mm) Top Layer
Violation between Pad S8-M(99.2293mm,109.982mm) Multi-Layer and
Area Fill (96.6894mm,106.1721mm) (101.7694mm,113.411mm) Top Layer
Violation between Pad S15-M(160.8666mm,109.982mm) Multi-Layer and
Area Fill (158.3266mm,106.172mm) (163.4066mm,113.411mm) Top Layer
Violation between Pad S2-M(46.3973mm,109.982mm) Multi-Layer and
Area Fill (43.8574mm,106.1721mm) (48.9374mm,113.411mm) Top Layer
Violation between Pad S11-M(125.6453mm,109.982mm) Multi-Layer and
Area Fill (123.1054mm,106.1721mm) (128.1854mm,113.411mm) Top Layer
Violation between Pad S10-M(116.84mm,109.982mm) Multi-Layer and
Area Fill (114.3mm,106.1721mm) (119.38mm,113.411mm) Top Layer
Violation between Pad S3-M(55.2027mm,109.982mm) Multi-Layer and
Area Fill (52.6627mm,106.1721mm) (57.7427mm,113.411mm) Top Layer
Violation between Pad S1-M(37.592mm,109.982mm) Multi-Layer and
Area Fill (35.052mm,106.1721mm) (40.1321mm,113.411mm) Top Layer
Violation between Pad S16-M(169.672mm,109.982mm) Multi-Layer and
Area Fill (167.132mm,106.172mm) (172.212mm,113.411mm) Top Layer
Violation between Pad S12-M(134.4506mm,109.982mm) Multi-Layer and
Area Fill (131.9107mm,106.1721mm) (136.9907mm,113.411mm) Top Layer
Rule Violations :16
Violations Detected :16

protel dxp2004进行drc后出现的错误,有没有人可以帮我看看是什么原因呢?Processing Rule :Short-Circuit Constraint (Allowed=No) (All),(All)Violation between Pad S14-M(152.0613mm,109.982mm) Multi-Layer andArea Fill (149.5213mm,106.17
具体问题具体分析,如果不方便就算了哈

检查你布线设置的规则

检查两点，一，这些线的网络是否有错，
二，线之间是否交叉短路