作业帮英语翻译The versatility of the shear punch test (SPT) was considered as an alternative for assessing the tensile properties of Al/Ni–SiC gradient composites fabricated by infiltration of liquid aluminum into coated ceramics.Tensile strength val
来源：学生作业帮助网 编辑：作业帮 时间：2024/05/06 04:03:27
英语翻译The versatility of the shear punch test (SPT) was considered as an alternative for assessing the tensile properties of Al/Ni–SiC gradient composites fabricated by infiltration of liquid aluminum into coated ceramics.Tensile strength val
英语翻译
The versatility of the shear punch test (SPT) was considered as an alternative for assessing the tensile properties of Al/Ni–
SiC gradient composites fabricated by infiltration of liquid aluminum into coated ceramics.Tensile strength values of the order
of 220 to 250 MPa were obtained.The nature of the shear-fractured surfaces was irregular for the composite specimens,with
shear failure over most of the surfaces but with some tensile failure at the margins.The substantial accumulation of NiAl3 in the
upper section specimen resulted in a higher strength and brittleness of the matrix compared to the low nickel content matrix
sections.
英语翻译The versatility of the shear punch test (SPT) was considered as an alternative for assessing the tensile properties of Al/Ni–SiC gradient composites fabricated by infiltration of liquid aluminum into coated ceramics.Tensile strength val
用途广泛的剪切冲床试验看作是另一种评估拉伸性能的铝镍-
上海国际赛车场有限公司梯度复合材料的渗透进涂上一层陶瓷铝液.抗拉强度值的秩序
220人至250 MPa.大自然的shear-fractured表面是不规则的复合材料试样,用
在大多数的剪切破坏的表面张力的失败,但一些边缘.NiAl3实质性积累的
上层标本导致了高强度和脆性基体比低镍含量矩阵
部分.