CCNA的题库,求翻译!Your ISP has given you the address 223.5.14.6/29 to assign to your router's interface. They have also given you the default gateway address of 223.5.14.7. After you have configured the address, the router is unable to ping any

来源:学生作业帮助网 编辑:作业帮 时间:2024/05/10 07:36:06

CCNA的题库,求翻译!Your ISP has given you the address 223.5.14.6/29 to assign to your router's interface. They have also given you the default gateway address of 223.5.14.7. After you have configured the address, the router is unable to ping any
CCNA的题库,求翻译!
Your ISP has given you the address 223.5.14.6/29 to assign to your router's interface. They have also given you the default gateway address of 223.5.14.7. After you have configured the address, the router is unable to ping any remote devices. What is preventing the router from pinging remote devices?
还有一题:
Which command would you configure globally on a Cisco router that would allow you to view directly connected Cisco devices?

CCNA的题库,求翻译!Your ISP has given you the address 223.5.14.6/29 to assign to your router's interface. They have also given you the default gateway address of 223.5.14.7. After you have configured the address, the router is unable to ping any
题意:你有一个ip地址223.5.14.6/29供你来配置路由接口,而且默认网关的路是223.5.14.7.
但是当你配置地址之后,路由器无法ping通任何远端设备,问你是什么在阻止它们的通信.
原因很简单,就不多说了.
第二个题意:
你在思科路由器的全局模式下面,配置什么命令,可以让你直接查看到连接的思科设备.
也很简单.关于cdp的.

题目一:
你的互联网服务供应商 (ISP) 已经指定了223.5.14.6/29这个地址给你的路由器界面(router's interface)使用;亦指定了你的预设闸道地址为223.5.14.7。在你把这些地址设定好之後,路由器(router)却未能探测到(ping)任何远端设备。是甚麼因素令路由器不能探测到远端设备?

题目二:
在一个 Cisco 路由器上,...

全部展开

题目一:
你的互联网服务供应商 (ISP) 已经指定了223.5.14.6/29这个地址给你的路由器界面(router's interface)使用;亦指定了你的预设闸道地址为223.5.14.7。在你把这些地址设定好之後,路由器(router)却未能探测到(ping)任何远端设备。是甚麼因素令路由器不能探测到远端设备?

题目二:
在一个 Cisco 路由器上,要在全域范围内用甚麼指令才能让你看到已经直接连接 Cisco 的设备?

收起